Hello
I am looking for a solution to be able to use the resins from PHOTOCENTRIC. I have to print parts that will be subject to mechanical constraints. Compatible resins are below.
https://photocentricgroup.com/wp-content/uploads/2020/03/TDS-UV-LCD-Firm.pdf
https://photocentricgroup.com/wp-content/uploads/2020/03/TDS-UV-LCD-Hard.pdf
https://photocentricgroup.com/wp-content/uploads/2020/03/TDS-UV-LCD-Flexible.pdf
I have an ELEEGO MARS PRO, I am having problems with all three resins. Either the whole model sticks to the FEP film or a part is on the plate and the other on the film with nothing in the middle. I have adapted the machine parameters with CHITUBOX according to the resins, but nothing works.
If you have any solutions, I would be happy to take all the information
Looking forward to reading you
ELEGOO resins work great, but don't have the strength needed for my parts. (that's a shame.)
Bonjour
Je suis à la recherche de solution pour pouvoir utiliser les résines de chez PHOTOCENTRIC. Je dois imprimer des pièces qui seront soumises à des contraintes mecanique. Les résines compatibles sont si dessous.
https://photocentricgroup.com/wp-content/uploads/2020/03/TDS-UV-LCD-Firm.pdf
https://photocentricgroup.com/wp-content/uploads/2020/03/TDS-UV-LCD-Hard.pdf
https://photocentricgroup.com/wp-content/uploads/2020/03/TDS-UV-LCD-Flexible.pdf
J'ai une ELEEGO MARS PRO, je rencontre des problèmes avec les trois résines. Soit tout le modele colle au film FEP ou une partie est sur le plateau et l'autre sur le film avec rien au millieu. J'ai adapté les paramètres machine avec CHITUBOX en fonction des resines, mais rien ne fonctionne. Si vous avez des solutions, c'est avec plaisir que je prendrais tous les renseignements
Au plaisir de vous lire
Les résines ELEGOO fonctionnent parfaitement, mais n'ont pas la résistance nécessaire pour mes pièces. (c'est bien dommage.)