Hi All-

I have an Elegoo Saturn and my prints are no where near accurate.  I'm printing an open box directly on a magnetic plate and my part is 76.2x76.2x13mm.  I'm printing with Siraya fast and my print measures 74.5 x 72.36mm.  The height is very close to the 13mm so not concerned about the Z axis, but the X and Y are way out.  Any ideas?  I tried printing a simple square of 25.4x25.4x2.52mm  again directly on the plate and it measured 25.31x24.35x2.29.

Any help would be appreciated.

Ken