Is it possible to add a feature where the bed can be moved up & down "x" amount of times at "x" distance and "x" speed between each layer.

For example:

Layer 100 bed comes down -> Cure for 8 seconds -> lift 2mm at 20mm/m -> lower 2mm  at 20mm/m -> lift 2mm at 20mm/m -> lower 2mm  at 20mm/m -> lift 2mm at 20mm/m -> lower 2mm  at 20mm/m -> lower to cure next layer.

This would help for us guys who are trying to get crystal clear prints by agitating the base and dislodging any possible bubbles

Thanks